TEST

Прижимная пластина HighLoad

The Eurotec Прижимная пластина HighLoad can be combined with the appropriate HighLoad tension rod. The former is necessary to prevent a deformation of the tension rod and to increase the tensile forces.

Material

  • Galvanised S355 construction steel

Advantages

  • Ideal for anchoring cross-laminated timber elements (CLT)
  • For installation in concrete, wood and steel

Note

  • The Прижимная пластина HighLoad may only be used in combination with the Анкерная стяжка HighLoad (item no.: 954114).

Instructions for use

The tension rods are positioned on the planking in the floor area to mark the drill hole. The tension rod is then put aside to drill and clean

the hole, and finally the tension rod is glued in using injection mortar. Now the tension rod incl. pressure plate can be positioned and fastened to the stem or wooden element with WBS screws or anchor nails. Finally, the nut is screwed onto the anchor rod using the relevant

torque. The connection can safely transfer tensile, suction and shearing forces into the tension rod via the screws and finally into the base

plates via a dowel. Edge and centre distances according to EC5 as well as the curing time and tightening torque of the concrete anchor must be observed.

Медиа-библиотека

Таблица артикулов

Art. no. Designation Dimension Material Matching tension rod PU EAN Code
954178 Прижимная пластина HighLoad mm 130 x 82 x 40 mm Galvanised S355 construction steel Анкерная стяжка HighLoad (954114) 1 4251314733566