Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
- The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
KonstruX ST, countersunk head
Galvanised
KonstruX fully threaded screw
- High extraction resistance
- Strong joints
Benefits of NEW drill point
- Reduced screwing torque
- Greater extraction resistance
KonstruX fully threaded screw
- The powerful solution for construction and renovation
One system for all timber-frameconstruction joints
- Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Product table
| Art. no. | Dimension | Drive | PU | EAN |
|---|---|---|---|---|
| 904797 | 8,0 x 295 mm | TX 40 | 50 Pieces | 4251314704870 |
| 904770 | 10,0 x 125 mm | TX 50 | 25 Pieces | 4251314704665 |
| 904799 | 8,0 x 375 mm | TX 40 | 50 Pieces | 4251314704894 |
| 904860 | 6,5 x 140 mm | TX 30 | 100 Pieces | 4251314746061 |
| 904771 | 10,0 x 155 mm | TX 50 | 25 Pieces | 4251314704672 |
| 904773 | 10,0 x 220 mm | TX 50 | 25 Pieces | 4251314704696 |
| 904780 | 10,0 x 450 mm | TX 50 | 25 Pieces | 4251314704764 |
| 904777 | 10,0 x 330 mm | TX 50 | 25 Pieces | 4251314704733 |
| 904781 | 10,0 x 500 mm | TX 50 | 25 Pieces | 4251314704771 |
| 904798 | 8,0 x 330 mm | TX 40 | 50 Pieces | 4251314704887 |
| 904774 | 10,0 x 245 mm | TX 50 | 25 Pieces | 4251314704702 |
| 904779 | 10,0 x 400 mm | TX 50 | 25 Pieces | 4251314704757 |
| 904793 | 8,0 x 195 mm | TX 40 | 50 Pieces | 4251314704832 |
| 904783 | 10,0 x 600 mm | TX 50 | 25 Pieces | 4251314704795 |
| 904791 | 8,0 x 125 mm | TX 40 | 50 Pieces | 4251314704818 |
| 904794 | 8,0 x 220 mm | TX 40 | 50 Pieces | 4251314704849 |
| 904802 | 8,0 x 480 mm | TX 40 | 50 Pieces | 4251314704924 |
| 904796 | 8,0 x 270 mm | TX 40 | 50 Pieces | 4251314704863 |
| 904859 | 6,5 x 120 mm | TX 30 | 100 Pieces | 4251314746054 |
| 904778 | 10,0 x 360 mm | TX 50 | 25 Pieces | 4251314704740 |
| 904857 | 6,5 x 80 mm | TX 30 | 100 Pieces | 4251314746030 |
| 904801 | 8,0 x 430 mm | TX 40 | 50 Pieces | 4251314704917 |
| 904775 | 10,0 x 270 mm | TX 50 | 25 Pieces | 4251314704719 |
| 904795 | 8,0 x 245 mm | TX 40 | 50 Pieces | 4251314704856 |
| 904772 | 10,0 x 195 mm | TX 50 | 25 Pieces | 4251314704689 |
| 904776 | 10,0 x 300 mm | TX 50 | 25 Pieces | 4251314704726 |
| 904782 | 10,0 x 550 mm | TX 50 | 25 Pieces | 4251314704788 |
| 904790 | 8,0 x 95 mm | TX 40 | 50 Pieces | 4251314704801 |
| 904792 | 8,0 x 155 mm | TX 40 | 50 Pieces | 4251314704825 |
| 904858 | 6,5 x 100 mm | TX 30 | 100 Pieces | 4251314746047 |
| 904800 | 8,0 x 400 mm | TX 40 | 50 Pieces | 4251314704900 |
| 904803 | 8,0 x 545 mm | TX 40 | 50 Pieces | 4251314751997 |
